Daniel
Alpha Buck
I’ve not posted any of my products on here for a long time so I thought I would create just one topic showcasing all my products. Any new ones will also be added here to save creating many threads and some of the new products include folding runs due to high demand.
The good news is that due to a change in how I manufacture these products below the cost to buy the products will be cheaper. Some of the products have videos too which help you see them better.
Starting with this, this one below was a bespoke kennel with design changes to house two sets of Guinea Pigs and it has two floors each just over 4x4ft. It has four doors, two at the back and two at the front with removable shutters.
The inside contained insulation and plywood lining and the customers planned to put a heater inside at some point.
The next one is a step to get into a hutch from a run rather than having to use a ramp as the ramp would have took to much space up in the run.
This one below is a Rabbit Shelter with three doors and was made for the runner up prize of the Bunny Of The Year (think its called that) competition for the Rabbiting On magazine.
The product below is a walk in run with solid half sides and solid timber back and roof. The size is around 6x6ft with the height being 6ft at the back and 7ft at the front. Was made for disabled Pigeons so they could have some time outside and be safe.
The next one is a 6x3x3ft Hutch connected to a 6x6x3ft Run with the step from above.
This one again is like the other one above but is a Walk In Double Rabbit Hutch and I got a bit of grief for this because I called it a Walk In Double Hutch and because the run is not the required size I got some grief for it.
This product like many others is not to be used standalone and the customer that wanted it wanted it how it was made and was going to be connected to another run.
Next one is a Timber Tunnel that can be used to join hutches to runs etc or as a standalone product and the roof opens to the back.
These below are Plywood Hideout Boxes from my Jumping On Range.
I am currently debating changing these to timber as they have got bad feedback for not looking good enough.
This little one below is a Hideout Box, or Jump Box and can be used for whatever you want it to be.
I’m sure most of you have seen the type below which is a Indoor Rabbit Pen or Cage.
This one like the above has a mesh roof on.
Next is a Double Rabbit Hutch and Run Combo with a step again to gain access to the run and the run has a solid timber and felt roof.
These are removable Shutters for the hutches, sheds etc.
Here below is a 6x6x6ft Walk In Run with solid timber and felt roof.
Below is a Rabbit Hutch with changes to make it a Double Quail Hutch, removable front floor covers to keep stuff inside when opening the doors and a divider with sliding door to block access off to one side.
Here is my new Rabbit House which is designed to go inside my standard hutches as the standard hutches do not have a divider in.
Some Aviary Panels that are just over 6x3ft which can be used to create runs or to block of parts of the garden.
And here is a Walk In Run / Aviary that is 12x6x6ft made by those above panels.
There you go, these are not all my products but they are some and some of the most recent work I’ve done. In a few weeks I am going to be building 3 sheds so that would allow me to showcase my Rabbit Sheds.
The good news is that due to a change in how I manufacture these products below the cost to buy the products will be cheaper. Some of the products have videos too which help you see them better.
Starting with this, this one below was a bespoke kennel with design changes to house two sets of Guinea Pigs and it has two floors each just over 4x4ft. It has four doors, two at the back and two at the front with removable shutters.
The inside contained insulation and plywood lining and the customers planned to put a heater inside at some point.
The next one is a step to get into a hutch from a run rather than having to use a ramp as the ramp would have took to much space up in the run.
This one below is a Rabbit Shelter with three doors and was made for the runner up prize of the Bunny Of The Year (think its called that) competition for the Rabbiting On magazine.
The product below is a walk in run with solid half sides and solid timber back and roof. The size is around 6x6ft with the height being 6ft at the back and 7ft at the front. Was made for disabled Pigeons so they could have some time outside and be safe.
The next one is a 6x3x3ft Hutch connected to a 6x6x3ft Run with the step from above.
This one again is like the other one above but is a Walk In Double Rabbit Hutch and I got a bit of grief for this because I called it a Walk In Double Hutch and because the run is not the required size I got some grief for it.
This product like many others is not to be used standalone and the customer that wanted it wanted it how it was made and was going to be connected to another run.
Next one is a Timber Tunnel that can be used to join hutches to runs etc or as a standalone product and the roof opens to the back.
These below are Plywood Hideout Boxes from my Jumping On Range.
I am currently debating changing these to timber as they have got bad feedback for not looking good enough.
This little one below is a Hideout Box, or Jump Box and can be used for whatever you want it to be.
I’m sure most of you have seen the type below which is a Indoor Rabbit Pen or Cage.
This one like the above has a mesh roof on.
Next is a Double Rabbit Hutch and Run Combo with a step again to gain access to the run and the run has a solid timber and felt roof.
These are removable Shutters for the hutches, sheds etc.
Here below is a 6x6x6ft Walk In Run with solid timber and felt roof.
Below is a Rabbit Hutch with changes to make it a Double Quail Hutch, removable front floor covers to keep stuff inside when opening the doors and a divider with sliding door to block access off to one side.
Here is my new Rabbit House which is designed to go inside my standard hutches as the standard hutches do not have a divider in.
Some Aviary Panels that are just over 6x3ft which can be used to create runs or to block of parts of the garden.
And here is a Walk In Run / Aviary that is 12x6x6ft made by those above panels.
There you go, these are not all my products but they are some and some of the most recent work I’ve done. In a few weeks I am going to be building 3 sheds so that would allow me to showcase my Rabbit Sheds.
Last edited:
)
